Single layer tubes are produced from 1 layer of plastic, which can consist of LDPE (low density polyethylene) and HDPE (high density polyethylene) and ends up being a medium density polyethylene. We do not stock any tubes – all tubes are made to order. Lead times for production and delivery are around 9-12 weeks from approval of pre-production samples.
The type of tube you will need will depend on your formulation. Please check with your formulator which tube type you will require. We can match any PMS colour for tubes and caps and can print directly onto the tubes in any PMS colour, tube and cap finishes can be supplied in either matte or gloss.
Size Guide
Sizing is in mm from shoulder to end of tube (not including cap), specifications are for reference only and custom sizes are available.
| Diameter | 13mm | 16mm | 19mm | 22mm | 25mm | 30mm | 35mm | 40mm | 45mm | 50mm | 55mm | 60mm |
| 3ml | 43 | |||||||||||
| 5ml | 58 | 45 | ||||||||||
| 10ml | 70 | 70 | 52 | |||||||||
| 15ml | 100 | 85 | 70 | 56 | ||||||||
| 20ml | 105 | 80 | 75 | |||||||||
| 25ml | 120 | 95 | 85 | 65 | ||||||||
| 30ml | 115 | 95 | 73 | |||||||||
| 35ml | 125 | 110 | 82 | |||||||||
| 40ml | 130 | 120 | 90 | 72 | ||||||||
| 45ml | 135 | 100 | 78 | |||||||||
| 50ml | 140 | 108 | 85 | 75 | ||||||||
| 60ml | 125 | 93 | 85 | |||||||||
| 70ml | 145 | 110 | 100 | |||||||||
| 80ml | 155 | 120 | 105 | |||||||||
| 90ml | 135 | 110 | ||||||||||
| 100ml | 150 | 120 | 105 | 90 | ||||||||
| 120ml | 165 | 140 | 123 | 105 | ||||||||
| 150ml | 165 | 140 | 120 | |||||||||
| 180ml | 155 | 138 | ||||||||||
| 200ml | 165 | 150 | 133 | |||||||||
| 220ml | 175 | 165 | 145 | 138 | ||||||||
| 240ml | 185 | 175 | 150 | 145 | ||||||||
| 250ml | 180 | 155 | 150 | |||||||||
| 300ml | 175 | 170 | ||||||||||
| 350ml | 195 | 190 | ||||||||||
| 400ml | 210 |
